Solvent-Free Epoxy
Solvent-free epoxy coloured sand and self-levelling systems with published low-VOC figures — for interiors, schools and healthcare, and for green-building submissions.
Our whole epoxy line is a solvent-free, low-VOC two-component system — published VOC figures on each product page. This is the branch to choose for interiors, occupied buildings and anything with a green-building requirement.
Products (20)
Colored Sand Floor Over Existing Tiles
Epoxy Colored SandThe coloured sand build specified for the floor that is already tiled and must not be lifted: twelve fixed factory-blended colours over a skimmed and abraded tile bed, with the grout grid dealt with as a preparation step and a plain statement that a thin decorative film records whatever is underneath it.
Kitchen Colored Sand Floor Coating
Epoxy Colored SandThe coloured sand build specified for the room that gets oily and wiped: twelve fixed factory-blended colours, the aggregate worked closed so the surface wipes instead of holding grease in the grain, and a plain statement that the cleaning product is what decides whether a gloss floor lasts.
Bathroom & Wet Room Colored Sand Floor Coating
Epoxy Colored SandThe coloured sand build specified for a room that gets wet and dries out every day: twelve fixed factory-blended colours, an open aggregate profile that a film of water cannot make smooth, and the water-control work placed where it belongs — falls, drain detail and upstand, not the coating.
Outdoor Colored Sand Floor Coating
Epoxy Colored SandAn exterior coloured sand build for terraces, balconies and courtyards: eleven fixed factory-blended colours, an open-aggregate film under a weatherable wear coat, and the colour shift that direct sun causes stated at quotation rather than discovered on site.
Interior Decorative Colored Sand Floor Coating
Epoxy Colored SandA light-duty coloured sand topcoat for interior floors that are walked on but not driven on: twelve fixed colours, a high-gloss film with visible aggregate, and a build thin enough to go over sound tile.
Graded Broadcast Epoxy Floor for Car Park Decks
Epoxy Colored SandAn exposed car park deck floor built from a blend of aggregate sizes rather than one sieve: the coarse fraction carries the tyre and the braking shear, the fines pack the voids between it, so the texture stays open where it has to shed water and stays even where the wheels actually run.
Laboratory Chemical-Resistant Epoxy Floor System
Epoxy Self-LevelingA seamless 2–3 mm epoxy floor for laboratories and QC suites: non-porous, coved at the wall base, and built for daily splash and wipe-down with detergents and dilute acids and alkalis.
Cleanroom & GMP Antistatic Epoxy Floor System
Anti-Static Self-LevelingA seamless, non-shedding ESD floor supplied as a system: earthed copper grid, conductive layers, 2–3 mm antistatic self-levelling body and a coved upstand, with resistance verified on the finished floor.
Epoxy Floor Over Existing Tiles
Epoxy Self-LevelingA seamless resin floor laid directly over sound ceramic or quarry tiles — no demolition, no dust, no re-screeding. Built to key into a glazed surface and to stop the old grout grid printing through.
Parking Deck & Ramp Anti-Slip Epoxy Floor
Epoxy Colored SandA coarse full-broadcast epoxy floor for car park decks and ramps: open aggregate texture for wet tyres and braking shear, movement joints detailed to move, and falls that drain.
Hospital & Clinic Seamless Epoxy Floor
Epoxy Self-LevelingA seamless, low-satin resin floor with a continuous coved upstand — no grout, no skirting gap and no joint for soil to hide in, and a surface that survives a daily disinfectant regime.
Warehouse & Forklift Traffic Epoxy Floor
Epoxy Colored SandA 4–5 mm full-broadcast epoxy floor for cushion-tyre forklift traffic: distributes contact stress, resists steer-scrub, and details joints so they do not spall under wheels.
Basement Epoxy Floor System
Epoxy Self-LevelingA below-grade basement floor specified from the moisture test outward: vapour-tolerant primer, 2 mm seamless self-levelling body, satin topcoat. Walk-on in 8–12 hours.
Epoxy Self-Leveling Flooring
Epoxy Self-LevelingA two-component epoxy self-leveling topping that flows into a mirror-flat, seamless, high-gloss surface.
Anti-Static Self-Leveling Epoxy
Anti-Static Self-LevelingA conductive self-leveling epoxy that safely dissipates static charge for sensitive electronic and cleanroom environments.
Flexible UV-Resistant Self-Leveling Epoxy
Epoxy Self-LevelingA crack-bridging, UV-stable self-leveling topcoat for sunlit areas and substrates with radiant floor heating.
Metallic Epoxy Colored Sand Flooring
Metallic Epoxy Colored SandA seamless decorative floor with marbled metallic depth — natural colored sand locked in a crystal-clear, low-VOC epoxy matrix.
Solid Color Epoxy Colored Sand Flooring
Solid Color Epoxy Colored SandA clean, uniform matte-to-gloss solid color floor with the durability of quartz-reinforced epoxy.
Flake Epoxy Colored Sand Flooring
Flake Epoxy Colored SandDecorative flake / quartz broadcast floor with a textured, slip-resistant, heavy-duty surface.
Heavy-Duty Anti-Slip Garage Epoxy Colored Sand
Flake Epoxy Colored SandA 3–4 mm full-broadcast quartz garage floor system: hot-tyre and oil resistant, textured for damp conditions, supplied in area-sized sets for contractors and distributors.
