Clinics, dental and veterinary rooms
Seamless and disinfectant-tolerant, no grout lines for spills to enter.
Solid Color Epoxy Colored Sand Flooring
SKU: FW-ECS-SOL
A clean, uniform matte-to-gloss solid color floor with the durability of quartz-reinforced epoxy.
Key Parameters
- Finish
- Semi-gloss
- Thickness
- 2 mm
- Coverage
- 3 kg/m²
- Mix Ratio
- A:B = 2:1
- Walk-on Time
- 8 h
Standard pack: 20 kg/set. Reply within 24 hours.
- ISO 9001
- SGS
- CE
- PICC
System line:Epoxy Colored Sand > Solid Color Epoxy Colored Sand
Why buyers specify it
- Uniform colour, matte / semi-gloss / gloss selectable
- Anti-slip sand texture that stays grippy when wet
- Colour-stable mineral pigment — the tone runs through the build rather than sitting on top of it
- Chemical and water resistant; hygienic seamless surface
- Local repair invisible — recolour a patch without a visible seam
A calm, uniform colour field with a subtle sand texture — the tidy look of a resin floor with real slip resistance.
Product overview
A single uniform colour field with a fine sand texture in it: 2 mm at 3 kg/m², semi-gloss, no pattern to coordinate and no aggregate to argue about. Adhesion 3.5 MPa, hardness >82 Shore D, compressive 65 MPa, VOC 5 g/L, warranty 10 years. Walk-on at about 8 hours, light service from 24 hours, full cure at 7 days.
What 2 mm asks of your slab
This is a thin build, and a thin build keeps the shape of what it goes on top of. A movement joint, a lipped edge or a dip in the slab will still be readable through 2 mm — the floor will be clean and coloured, but it will not be flat where the slab was not. That is not a defect, it is what the thickness buys and costs.
So the honest split in our coloured-sand range is by substrate, not by taste. If the slab is sound and level and you want a calm, repeatable colour across a large area, this is the right build. If the slab has history — old tiles, hairline cracks, a fall that needs burying — the 4 mm broadcast is the one that forgives it, and it wears harder too (≤0.02 g on the Taber plate against the ≤0.04 g this build gives).
Why a single colour field
Six colours: Ivory, Light Grey, Warm Beige, Sage Green, Terracotta, Charcoal. A uniform field has no pattern to repeat, so bays poured on different days join without a visible seam in the design, and a repair is a colour match rather than a pattern match. That matters most in corridors, classrooms and clinics — places with long runs of floor and no interest in a decorative statement.
The fine sand in it is what makes a semi-gloss floor liveable: it breaks up the sheen enough that footprints and the swirl of a squeegee stop being the whole story of the surface.
Indoor, by design
Every application we list for this build is inside. Epoxy ambers under direct sunlight — that is the resin, not our pigment — so a south-facing glazed wall or an open bay door with afternoon sun on it is a different conversation, and the one to have is with the UV-stable flexible system rather than this one.
Cleanability
The seamless part is the point: there are no joints, no grout lines and no profile to hold soil, so a damp mop takes the day off the floor. That is a real hygiene property and it is a physical one — we do not claim a biocidal surface, we claim one you can actually wipe.
Numbers we publish
Compressive 65 MPa, tensile 40 MPa, adhesion 3.5 MPa, hardness >82 Shore D, abrasion ≤0.04 g (Taber CS-17, 1000 cycles), VOC 5 g/L, warranty 10 years, supplied as a 20 kg set at A:B = 2:1 with a 30 minute pot life. Typical laboratory values; the final specification is confirmed in writing before you order.
Typical applications
Clinics and treatment rooms, offices, classrooms and corridors, residential interiors, and any commercial floor where the brief is a calm, even colour rather than a texture.
An epoxy colored sand floor is a build-up system rather than a coating: primer, resin binder, a broadcast of natural colored sand or metallic pigment, then a clear wear topcoat. The result is a seamless, joint-free surface that carries its texture through the whole thickness, so it does not wear through the way a printed film would.
Solid colour systems use mineral-pigmented sand rather than metallic flakes, so the colour stays stable across the slab and small repairs blend in. It is the most specified option for clinics, classrooms and corridors where hygiene and quiet appearance matter more than decoration.
System build-up (typical, per m²)
| Primer | 0.2 kg/m²Epoxy penetrating primer |
|---|---|
| Mortar / scatter coat | 2.0–2.5 kg/m²Pigmented epoxy colored sand |
| Seal coat | 0.3 kg/m²Clear or tinted epoxy, chosen gloss level |
| Total build | 2–3 mmNominal 2 mm system |
Rated features
- seamless
- anti-slip
- easy-clean
- low-VOC
- chemical-resistant
- color-stable
Colour options
- Ivory
- Light Grey
- Warm Beige
- Sage Green
- Terracotta
- Charcoal
Full specifications
| Brand | Friway |
|---|---|
| SKU | FW-ECS-SOL |
| Category | Epoxy Colored Sand > Solid Color Epoxy Colored Sand |
| Finish | Semi-gloss |
| Specification | 2mm solid color epoxy colored sand flooring |
| Coverage | 3 kg/m² |
| Thickness | 2 mm |
| Mix Ratio | A:B = 2:1 |
| Pot Life | 30 min |
| Walk-on Time | 8 h |
| Full Cure | 168 h |
| Hardness | >82 Shore D |
| Adhesion | 3.5 MPa |
| Compressive Strength | 65 MPa |
| Tensile Strength | 40 MPa |
| Abrasion Resistance | ≤0.04 g (Taber CS-17, 1000 cycles) |
| VOC | 5 g/L |
| Package | 20 kg/set |
| Warranty | 10 years |
Installation & cure data
| Mix ratio | A:B = 2:1 by weight |
|---|---|
| Pot life | 30 min at 20 °C |
| Recoat window | 6–12 h |
| Foot traffic | 8 hAt 20 °C |
| Full cure | 7 days at 20 °CLight service at 24 h; chemical exposure only after full cure |
| Working conditions | 10–35 °C, RH ≤ 80 %Sound concrete ≥ C25, substrate moisture ≤ 4 % (CM test), ambient 10–35 °C and relative humidity ≤ 80 %, surface at least 3 °C above dew point. |
Performance
| Adhesion | ≥ 3.5 MPa |
|---|---|
| Hardness | > 82 Shore D |
| Abrasion | ≤ 0.04 gTaber CS-17, 1 000 cycles |
| Slip resistance | Fine sand textureCoarser grain for wet or oily duty; ramp testing on request |
| Cleanability | Wipe-clean, disinfectant-tolerantQuaternary ammonium and 70 % IPA |
| VOC | ≈ 5 g/LPublished figure for this build; emission class on request |
Figures are typical values measured in our laboratory. Substrate, climate and workmanship affect the result — we confirm the final specification in writing before your order.
Documents for this system
We release documents as editable originals on request (batch-specific data is not in a generic PDF). One click sends your request with this product attached.
- Technical Data SheetBuild-up, gloss options and grain sizesRequest
- Safety Data Sheet (SDS)Component-wiseRequest
- Colour card (RAL-matched)Physical sample card, shipped freeRequest
- Cleanability reportDisinfectant exposure testRequest
Certifications for this system
- ISO 9001
- SGS
- CE
More resources
Packaging
Two-component sets palletised for export, shipped fromDongguan, Guangdong, China by Dongguan Friway Hydraulic Control Technology Co., Ltd..
| Set composition | 20 kg/set |
|---|---|
| Net weight / set | 20 kg |
| Pallet configuration | 20 sets (500 kg net) per 1200 × 1000 mm pallet, stretch-wrapped with corner boards — recalculated for your pail size at quotation |
| 20 ft container | Confirmed at quotation — the figure above is for our standard pail size |
| 40 ft HQ | Confirmed at quotation |
| Shelf life | 12 months from fill date |
| Storage | Dry, ventilated store, 5–35 °C, keep away from direct sunlight; store Part A and Part B separately and reseal after use. |
Lead time
Counted from confirmed deposit and approved colour. FOBShenzhen or Guangzhou; CIF and DDP quoted on request.
| Order quantity | Lead time | Notes |
|---|---|---|
| Sample (≤ 2 sets) | 2–4 days | courier freight collect via DHL / UPS / FedEx, shipping at your cost; 5–7 days door to door |
| 1–49 sets | 5–7 days | Stock colours first; standard export packing included |
| 50–199 sets | 10–12 days | Includes batch mixing and in-house QC record per batch |
| 200–999 sets | 15–20 days | Production slot reserved after 30% deposit |
| FCL / 1000+ sets | 22–28 days | Confirmed against the shipping schedule; FOB Shenzhen or Guangzhou |
Customisation
- Colour matchingMOQ 5 sets (≈ 100 kg)
RAL / Pantone reference or a physical sample; we send a wet film for approval before batch production.
- Own-brand labellingMOQ 20 sets (≈ 400 kg)
Your logo and language on the pails and carton; artwork in AI/PDF. Blank labelling available below this MOQ.
- Packaging & cartonMOQ 50 sets (≈ 1,000 kg)
Pail size, carton printing, palletising and shipping marks per your export requirement.
- Full OEM / ODMMOQ 200 sets (≈ 4,000 kg)
Formulation adjustment (gloss, cure speed, aggregate, conductivity range) with TDS and CoA issued under your brand.
Certifications & paperwork
Company-level documents we can issue for this system. We supply certificate copies and batch test reports on request rather than publishing them as images.
- ISO 9001Quality management system for the flooring coatings lineCertificate copy + audit scope on request
- SGS testedAdhesion, hardness, abrasion and VOC on finished filmTest report per batch on request
- CE / DoCDeclaration of conformity for European projectsDoC issued with shipment documents
- French A+ VOCIndoor air-emission class for living-space floorsClassification sheet on request
- PICC product liabilityProduct liability cover for exported goodsPolicy summary on request
- MSDS / SDSPer component — needed for sea and air freight approvalIssued with every shipment
Application sequence
Grind and vacuumDay 1
CSP 1–2 profile, no laitance left; dust is the main cause of delamination.
Prime2–4 h
Roll epoxy primer and let it go tack-free.
Broadcast the pigmented sand45 min/100 m²
Spread colored sand into the wet resin and lock it with a second roll of binder.
Roll off and flattenSame pass
Remove loose grain and level the texture so the colour field reads uniform.
Seal coat6–12 h later
Apply the chosen gloss seal coat; keep the wet edge to avoid lap marks.
Cure and releaseNext day
Barrier off; foot traffic after 8 hours, furniture after 24 hours.
Field tips
- Keep one batch number per room — mineral pigment from different lots can show a faint shade shift.
- Close wet edges within the pot life; on large slabs plan pour strips with tape lines instead of cold joints.
- In clinics, specify the semi-gloss seal: gloss shows tyre and scuff marks, matte shows dust.
- Do not seal before the scatter coat has outgassed, or pinholes will appear in the film.
Need the full method statement for your site? Request it with the form below — we review your slab data before your crew starts.
Where this system works
Classrooms and corridors
Quiet, uniform colour with enough texture for shoe grip.
Residential interiors
Matte solid colours work as a modern alternative to tiles, without grout.
Food prep back-of-house
Wash-down friendly when paired with the coarse-grain option.
Declared applications
- commercial
- residential
- hospital
Compatible substrates
- concrete
- tile
- cement
After handover
- Daily: auto-scraper or damp mop with neutral cleaner.
- Spills of coffee, dye or cosmetics: wipe within a few hours before they stain the seal.
- Refresh the seal coat instead of the whole system when the gloss dulls.
Frequently asked questions
Can you match a specific RAL or Pantone colour?
Yes, we tint to RAL and most Pantone references. Send the code and we return a physical sample card before the order.
Is it suitable for wet areas?
Yes — the sand texture keeps a barefoot and shoe grip when damp. Showers need a fall-to-drain detail, which we specify with the system.
What happens if a panel gets damaged?
Because the colour goes through the build, a local re-broadcast and seal usually disappears into the field; no full-room redo.
Which gloss should I choose for a corridor?
Semi-gloss. Gloss shows footprints and scuffs, matte shows dust — semi-gloss hides both in low-side light.
Your project has conditions we cannot see from here? Send the slab report and drawings — our engineers answer with a written specification.
Related Products
Made in Our Own Factory
Dongguan Friway Hydraulic Control Technology Co., Ltd.
Every batch of Solid Color Epoxy Colored Sand Flooring is produced in our own facility by a team that integrates R&D, production, sales and technical service. Advanced equipment, batch-level lab testing and a complete quality system mean consistent quality — from the first sample to the last pallet.
Mixing Lines
Reactor Kettles
Dispersing Equipment
Mixing & Control
Raw-Material Store
Labelling
Vacuum Mixing
QC Drying Oven
Filling & Capping
Questions about production, certificates or MOQ?
Ask Our Team- ISO 9001Quality management system for the flooring coatings lineCertificate copy + audit scope on request
- SGS testedAdhesion, hardness, abrasion and VOC on finished filmTest report per batch on request
- CE / DoCDeclaration of conformity for European projectsDoC issued with shipment documents
- French A+ VOCIndoor air-emission class for living-space floorsClassification sheet on request
- PICC product liabilityProduct liability cover for exported goodsPolicy summary on request
- MSDS / SDSPer component — needed for sea and air freight approvalIssued with every shipment
Certificates & Lab Reports
This product line is verified by third-party laboratories. The marks shown above are the ones we publish as images; the documents behind them — certificate copies, batch-specific test reports, the CE Declaration of Conformity — are issued on request. A scanned badge proves nothing about your slab; the report behind it does.
Get a Free Quote
Need a Specification for Your Slab?
Send the floor area, substrate condition and what the room has to take. We reply with the system build-up, coverage estimate and an FOB quotation — usually within 24 hours.
- Tell us about the floorArea in m², substrate condition, and the finish or colour you want.
- Get a technician's replyWithin 24 hours: system build-up, coverage estimate, pricing and TDS/MSDS.
- Confirm colour & sampleFree colour chips and a cured sample panel before you place an order.