Our Videos
Walkthrough clips of our epoxy colored-sand and self-leveling systems — prep, pour, broadcast and the finishes on the colour chart.
0:34installationMixing Epoxy Colored Sand: Resin, Hardener and the Broadcast
The binder and hardener are combined, colored sand is worked in, then the mix is scraped flat with a notched scraper and back-rolled - closing on a completed interior floor.
1:32factoryFactory Walkthrough: Mixing, Filling and the QC Lab
On the plant floor: reactor kettles and vacuum mixing on the mezzanine, the filling and labelling line, and the QC bench with its drying oven.
0:15productsDurability Figures: Adhesion, Hardness & Abrasion
The three figures to ask any supplier to put in writing: pull-off adhesion, Shore D hardness and Taber mass loss.
0:12projectsBefore & After: Renovation Over a Worn Floor
A worn, dusty slab ground open, repaired and coated to a seamless epoxy finish, shown stage by stage.
0:12productsEpoxy Colored Sand Color Chart Showcase
A close-up look at the metallic, solid and flake colour families on the colored-sand chart.
0:14installationSelf-Leveling Epoxy Pour — Mirror-Flat Finish
How a self-leveling epoxy is mixed, poured, gauge-raked and de-aired to a flat, seamless surface.
0:16installationEpoxy Colored Sand Installation — Stage by Stage
The four stages a colored-sand epoxy floor goes through: substrate prep, priming, broadcast and sealing.