Cleanrooms and electronics assembly
Dust-free, seamless, and compatible with the anti-static variant when ESD is required.
Epoxy Self-Leveling Flooring
SKU: FW-SLF-EPO
A two-component epoxy self-leveling topping that flows into a mirror-flat, seamless, high-gloss surface.
Key Parameters
- Finish
- Gloss
- Thickness
- 2 mm
- Coverage
- 2 kg/m²/mm
- Mix Ratio
- A:B = 4:1
- Walk-on Time
- 8 h
Standard pack: 25 kg/set. Reply within 24 hours. Custom RAL colours and OEM packaging available.
- ISO 9001
- SGS
- CE
- PICC
System line:Self-Leveling Epoxy > Epoxy Self-Leveling
Why buyers specify it
- Mirror-flat seamless finish, no joints and no grout lines
- High adhesion (≥ 3.8 MPa) and compressive strength
- Chemical, water and abrasion resistant
- Hygienic and easy to decontaminate — cleanroom friendly
- Low-VOC at ≈ 3 g/L; walk-on the same day, light service from 24 h
Two-component epoxy topping that flows into a mirror-flat, seamless, hygienic surface — the pick for controlled environments.
Product overview
A two-component epoxy topping that flows out to a mirror-flat seamless sheet: 2 kg/m² per mm of build, poured at 2 mm, gloss, with 80 MPa compressive behind it. It bonds at 3.8 MPa with 55 MPa tensile, holds >80 Shore D, and measures 3 g/L VOC. Walk-on at about 8 hours, light service from 24 hours, full cure at 7 days.
A different system from the coloured-sand builds
Note the mix ratio: A:B = 4:1, where the coloured-sand systems run at 2:1. It is not the same resin with a different bag of aggregate — this is a levelling topping formulated to flow, self-smooth and take a load, with no broadcast in the build at all. The 25 kg set is proportioned for that system, so the two are not interchangeable on site and should not be substituted for each other mid-job.
The 35 minute pot life is the whole trick of it: a levelling compound has to stay mobile long enough to find its own plane after it has been squeegeed and spiked. A short window would leave you chasing a surface that has already started to set.
What mirror-flat costs you
Worth naming before you specify it, because it is the complaint we get asked about most:
- A gloss sheet shows footprints, dust and primer roll marks in a way a matte broadcast never will. In a low-dust interior that is fine; in a muddy-entry workshop it is a cleaning regime.
- It is thin and stiff. A crack that keeps moving in the slab will reflect through 2 mm of epoxy. Where the substrate moves, that is a joint detail to design, not a product to blame.
- A flat gloss film is also the shape that holds a layer of water under a wet shoe. If the duty is a hosing-down area or a ramp, the aggregate texture is the answer, not this.
Chemical resistance and cleaning
Chemical resistance is a published property of this build, and the honest version of it is this: the resin tolerates detergents, sugars, mild acids and the standing water of a wet-process room far better than a cementitious surface, but the specific splash, concentration and dwell time for your plant is confirmed at quotation rather than guessed from a table. If you can tell us what hits the floor and for how long, we will tell you whether this is the right build or whether you need a different one.
For food and beverage areas the same distinction applies: this build suits a detergent-and-water cleaning regime. It is not the product for hot alkaline washdown or steam — that duty belongs to a binder chemistry we do not manufacture, and a floor specified past its limit is a floor that fails on schedule.
Where it belongs
Seamless and cove-able, which is why it lands in hospitals, laboratories and cleanrooms: no joints and no grout lines means there is nowhere for soil to live, and the surface takes a damp wipe without breaking. The hygienic claim here is a physical one — a floor you can actually clean — not a biocidal coating.
Numbers we publish
Compressive 80 MPa, tensile 55 MPa, adhesion 3.8 MPa, hardness >80 Shore D, abrasion ≤0.03 g (Taber CS-17, 1000 cycles), VOC 3 g/L, warranty 10 years, 25 kg/set at A:B = 4:1, pot life 35 minutes. Colours: Light Grey, Mid Grey, Off-White, Pale Green, Custom RAL. Typical laboratory values; the final specification is confirmed in writing before you order.
Typical applications
Cleanrooms, laboratories, hospitals and clinics, showrooms, warehouses and light industrial floors, and food and beverage areas running a detergent-and-water regime.
Self-levelling epoxy is poured, not trowelled: the mixed two-component resin finds its own level, so the surface follows the beam line rather than the applicator's wrist. The result is a glass-smooth, joint-free floor with no texture to trap dust.
Because the material is self-de-airing only to a limit, the spiked-roller pass is not optional — it releases entrapped air and evens the film against the substrate's pinholes.
System build-up (typical, per m²)
| Primer | 0.15–0.25 kg/m²Low-viscosity epoxy primer, rolled |
|---|---|
| Levelling (if needed) | 1.7 kg/m² per mmCementitious compound for deep areas |
| Self-levelling topping | 2.0 kg/m² per mmA:B = 4:1, poured 1–3 mm |
| Wear coat (optional) | 0.25 kg/m²For chemical or UV exposure |
| Typical build | 2–3 mm |
Rated features
- seamless
- self-leveling
- chemical-resistant
- waterproof
- low-VOC
- easy-clean
- hygienic
Colour options
- Light Grey
- Mid Grey
- Off-White
- Pale Green
- Custom RAL
Custom RAL matching available — we ship a physical sample card before production.
Full specifications
| Brand | Friway |
|---|---|
| SKU | FW-SLF-EPO |
| Category | Self-Leveling Epoxy > Epoxy Self-Leveling |
| Finish | Gloss |
| Specification | 2mm epoxy self-leveling topping |
| Coverage | 2 kg/m²/mm |
| Thickness | 2 mm |
| Mix Ratio | A:B = 4:1 |
| Pot Life | 35 min |
| Walk-on Time | 8 h |
| Full Cure | 168 h |
| Hardness | >80 Shore D |
| Adhesion | 3.8 MPa |
| Compressive Strength | 80 MPa |
| Tensile Strength | 55 MPa |
| Abrasion Resistance | ≤0.03 g (Taber CS-17, 1000 cycles) |
| VOC | 3 g/L |
| Package | 25 kg/set |
| Warranty | 10 years |
Installation & cure data
| Mix ratio | A:B = 4:1 by weightWeigh, do not eyeball |
|---|---|
| Pot life | 35 min at 20 °CRoughly 20 min at 30 °C |
| Pour thickness | 1–3 mm in one passTaller builds in two stages |
| De-air rolling | Within 10 min of pouring |
| Foot traffic | 8 hAt 20 °C |
| Full cure | 7 days at 20 °C (light service at 24 h)Sound concrete ≥ C25, substrate moisture ≤ 4 % (CM test), ambient 10–35 °C and relative humidity ≤ 80 %, surface at least 3 °C above dew point. |
Performance
| Adhesion | ≥ 3.8 MPa |
|---|---|
| Compressive | 80 MPa |
| Tensile | 55 MPa |
| Hardness | > 80 Shore D |
| Flatness | ±2 mm / 2 m straightedgeOn a prepared substrate |
| VOC | ≈ 3 g/LPublished figure for this build; emission class on request |
Figures are typical values measured in our laboratory. Substrate, climate and workmanship affect the result — we confirm the final specification in writing before your order.
Documents for this system
We release documents as editable originals on request (batch-specific data is not in a generic PDF). One click sends your request with this product attached.
- Technical Data SheetPour thickness, mixing and cure scheduleRequest
- Safety Data Sheet (SDS)Component-wiseRequest
- Installation method statementStep-by-step with tooling listRequest
- Chemical resistance chartSubstance vs. exposure timeRequest
Certifications for this system
- ISO 9001
- SGS
- CE
More resources
Packaging
Two-component sets palletised for export, shipped fromDongguan, Guangdong, China by Dongguan Friway Hydraulic Control Technology Co., Ltd..
| Set composition | 25 kg/set |
|---|---|
| Net weight / set | 25 kg |
| Pallet configuration | 24 sets (480 kg net) per 1200 × 1000 mm pallet, stretch-wrapped with corner boards — recalculated for your pail size at quotation |
| 20 ft container | Confirmed at quotation — the figure above is for our standard pail size |
| 40 ft HQ | Confirmed at quotation |
| Shelf life | 12 months from fill date |
| Storage | Dry, ventilated store, 5–30 °C; protect from frost and direct sunlight. Keep sealed — Part B absorbs moisture from air. |
Lead time
Counted from confirmed deposit and approved colour. FOBShenzhen or Guangzhou; CIF and DDP quoted on request.
| Order quantity | Lead time | Notes |
|---|---|---|
| Sample (≤ 2 sets) | 2–4 days | courier freight collect via DHL / UPS / FedEx, shipping at your cost; 5–7 days door to door |
| 1–49 sets | 5–7 days | Stock colours first; standard export packing included |
| 50–199 sets | 10–12 days | Includes batch mixing and in-house QC record per batch |
| 200–999 sets | 15–20 days | Production slot reserved after 30% deposit |
| FCL / 1000+ sets | 22–28 days | Confirmed against the shipping schedule; FOB Shenzhen or Guangzhou |
Customisation
- Colour matchingMOQ 5 sets (≈ 125 kg)
RAL / Pantone reference or a physical sample; we send a wet film for approval before batch production.
- Own-brand labellingMOQ 20 sets (≈ 500 kg)
Your logo and language on the pails and carton; artwork in AI/PDF. Blank labelling available below this MOQ.
- Packaging & cartonMOQ 50 sets (≈ 1,250 kg)
Pail size, carton printing, palletising and shipping marks per your export requirement.
- Full OEM / ODMMOQ 200 sets (≈ 5,000 kg)
Formulation adjustment (gloss, cure speed, aggregate, conductivity range) with TDS and CoA issued under your brand.
Certifications & paperwork
Company-level documents we can issue for this system. We supply certificate copies and batch test reports on request rather than publishing them as images.
- ISO 9001Quality management system for the flooring coatings lineCertificate copy + audit scope on request
- SGS testedAdhesion, hardness, abrasion and VOC on finished filmTest report per batch on request
- CE / DoCDeclaration of conformity for European projectsDoC issued with shipment documents
- French A+ VOCIndoor air-emission class for living-space floorsClassification sheet on request
- PICC product liabilityProduct liability cover for exported goodsPolicy summary on request
- MSDS / SDSPer component — needed for sea and air freight approvalIssued with every shipment
Application sequence
Assess and grindDay 1
Measure flatness and moisture, then diamond-grind to CSP 1–2 and vacuum the dust.
Repair and level4 h + dry
Fill cracks, bridge joints, and pre-level deep low spots with the cementitious compound.
Prime2–3 h
Roll the low-viscosity primer; a starved primer causes pinholes.
Mix and pour in ribbons30 min/batch
Weigh A:B exactly, mix 2–3 min slowly, pour and guide with a gauge rake.
De-air with a spiked rollerContinuous
Roll immediately and again after 10 minutes; keep the wet edge broken.
Cure, protect, releaseNext day
Keep dust and moisture off for 24 hours; do not seal before full outgassing.
Field tips
- Temperature is the hidden variable: cold slabs increase viscosity and leave rake marks.
- Change the mix crew's water-free discipline — never thin epoxy self-levelling with solvent.
- Plan the escape route before the first bucket; you cannot walk back over a live pour.
- For cleanrooms, tape the perimeter detail and coving separately — the fillet radius is where audits look.
Need the full method statement for your site? Request it with the form below — we review your slab data before your crew starts.
Where this system works
Laboratories and hospitals
Disinfectant-tolerant surface with no joints to harbour contamination.
Food and beverage processing
Wash-down capable with a wear coat; specify drainage falls during survey.
Showrooms and light industrial
High-gloss flat floor that reflects lighting without texture.
Declared applications
- hospital
- commercial
- factory
- showroom
- warehouse
Compatible substrates
- concrete
- cement
- tile
After handover
- Damp mop with neutral or mildly alkaline cleaner; the flat surface releases dirt easily.
- Use wheel-compatible castors; metal shavings drag visible lines on gloss finishes.
- Apply a maintenance coat in high-traffic aisles once the gloss bands appear.
Frequently asked questions
Can self-levelling epoxy go on an uneven old slab?
Yes — first level deep areas with the cementitious compound, then pour 1–3 mm of epoxy topping. Total flatness comes from the combination.
How soon can the room be used?
Foot traffic after roughly 8 hours at 20 °C; trolleys and wheeled loads after 24 hours; chemical cleaning only after 7 days.
Is it slippery when wet?
A standard gloss film is not a wet-area floor. Where water or cleaning is routine we add a broadcast texture or an anti-slip topcoat — tell us the room's use before we quote, and we will arrange a ramp classification on your build if your project documentation needs one.
Do you supply the whole system?
Yes: primer, topping and wear coat in matched kits with the A:B ratio printed per batch, plus the method statement.
Your project has conditions we cannot see from here? Send the slab report and drawings — our engineers answer with a written specification.
Related Products
Made in Our Own Factory
Dongguan Friway Hydraulic Control Technology Co., Ltd.
Every batch of Epoxy Self-Leveling Flooring is produced in our own facility by a team that integrates R&D, production, sales and technical service. Advanced equipment, batch-level lab testing and a complete quality system mean consistent quality — from the first sample to the last pallet.
Mixing Lines
Reactor Kettles
Dispersing Equipment
Mixing & Control
Raw-Material Store
Labelling
Vacuum Mixing
QC Drying Oven
Filling & Capping
Questions about production, certificates or MOQ?
Ask Our Team- ISO 9001Quality management system for the flooring coatings lineCertificate copy + audit scope on request
- SGS testedAdhesion, hardness, abrasion and VOC on finished filmTest report per batch on request
- CE / DoCDeclaration of conformity for European projectsDoC issued with shipment documents
- French A+ VOCIndoor air-emission class for living-space floorsClassification sheet on request
- PICC product liabilityProduct liability cover for exported goodsPolicy summary on request
- MSDS / SDSPer component — needed for sea and air freight approvalIssued with every shipment
Certificates & Lab Reports
This product line is verified by third-party laboratories. The marks shown above are the ones we publish as images; the documents behind them — certificate copies, batch-specific test reports, the CE Declaration of Conformity — are issued on request. A scanned badge proves nothing about your slab; the report behind it does.
Get a Free Quote
Need a Specification for Your Slab?
Send the floor area, substrate condition and what the room has to take. We reply with the system build-up, coverage estimate and an FOB quotation — usually within 24 hours.
- Tell us about the floorArea in m², substrate condition, and the finish or colour you want.
- Get a technician's replyWithin 24 hours: system build-up, coverage estimate, pricing and TDS/MSDS.
- Confirm colour & sampleFree colour chips and a cured sample panel before you place an order.