Self-Leveling Epoxy
Self-leveling epoxy & cement flooring systems. Ultra-flat, high adhesion 3.8MPa, fast curing, anti-static and radiant-heat compatible options.
The poured, flat side of the catalogue: self-levelling resin that forms the wearing surface, and the cementitious compounds used to make a slab ready for it. The same word gets used for both layers, which is where most ordering mistakes in this family start, so the pages below separate them — the general resin build, the conductive builds for rooms where static is a control requirement, and the cement-based levelling compound that is preparation rather than a finished floor. Choose by what the room has to take, then read the product page for the build-up and the cure windows.
Products (9)
Laboratory Chemical-Resistant Epoxy Floor System
Epoxy Self-LevelingA seamless 2–3 mm epoxy floor for laboratories and QC suites: non-porous, coved at the wall base, and built for daily splash and wipe-down with detergents and dilute acids and alkalis.
Cleanroom & GMP Antistatic Epoxy Floor System
Anti-Static Self-LevelingA seamless, non-shedding ESD floor supplied as a system: earthed copper grid, conductive layers, 2–3 mm antistatic self-levelling body and a coved upstand, with resistance verified on the finished floor.
Epoxy Floor Over Existing Tiles
Epoxy Self-LevelingA seamless resin floor laid directly over sound ceramic or quarry tiles — no demolition, no dust, no re-screeding. Built to key into a glazed surface and to stop the old grout grid printing through.
Hospital & Clinic Seamless Epoxy Floor
Epoxy Self-LevelingA seamless, low-satin resin floor with a continuous coved upstand — no grout, no skirting gap and no joint for soil to hide in, and a surface that survives a daily disinfectant regime.
Basement Epoxy Floor System
Epoxy Self-LevelingA below-grade basement floor specified from the moisture test outward: vapour-tolerant primer, 2 mm seamless self-levelling body, satin topcoat. Walk-on in 8–12 hours.
Epoxy Self-Leveling Flooring
Epoxy Self-LevelingA two-component epoxy self-leveling topping that flows into a mirror-flat, seamless, high-gloss surface.
Anti-Static Self-Leveling Epoxy
Anti-Static Self-LevelingA conductive self-leveling epoxy that safely dissipates static charge for sensitive electronic and cleanroom environments.
Cement-Based Self-Leveling Compound
Cement-Based Self-LevelingA fast-setting cementitious levelling compound that creates a smooth, flat substrate for floor coverings or as a wear surface.
Flexible UV-Resistant Self-Leveling Epoxy
Epoxy Self-LevelingA crack-bridging, UV-stable self-leveling topcoat for sunlit areas and substrates with radiant floor heating.
